All Categories

  • All Categories
  • Radio System
  • ESC - SPEED CONTROL - AIR
  • ESC - SPEED CONTROL - SURFACE
  • RADIO TRANSMITTERS - AIR
  • RADIO TRANSMITTERS - SURFACE
  • RECEIVERS - AIR
  • SERVOS - AIRPLANE & HELI
  • SERVOS - CAR & BOAT
  • RC Parts
  • AIRPLANE PARTS
  • BATTERIES
  • BOAT PARTS
  • CAR & TRUCK PARTS
  • CAR BODIES
  • CHARGERS
  • DRONE PARTS
  • HELICOPTER PARTS
  • TIRES & WHEELS
  • RC Vehicles
  • Car & Truck
  • RC Airplane
  • RC Boat
  • RC Drone&FPV
  • RC Helicopter
  • RC Tank

Tekno RC NB48.3 1/8 Competition Nitro Buggy Kit TKR5304

  • $305.49

This is the NB48.3 1/8 Competition Nitro Buggy Kit by Tekno RC.The NB48.3 is faster, nimbler, and easier to drive and it incorporates some forward thinking that breaks the mold of what a nitro buggy is supposed to be. Teckno..

  • Brand: Tekno RC
  • Product Code:STS0000066
  • Availability:In Stock

Tags: Tekno, NB48.3, 1/8, Competition, Nitro, Buggy, Kit, TKR5304, Car, Truck

This is the NB48.3 1/8 Competition Nitro Buggy Kit by Tekno RC.

The NB48.3 is faster, nimbler, and easier to drive and it incorporates some forward thinking that breaks the mold of what a nitro buggy is supposed to be. Teckno RC started with the suspension and completely redesigned the geometry. The new design aimed to improve big jump landings, while at the same time improve small bump handling and consistency.

Longer shocks have been fitted to increase suspension travel and new to towers were designed to optimize shock angles. Revised upper camber link positions on both the front and rear shock tower provide setup options that improve drivability and traction in all conditions. A new piston was designed specifically for the longer shocks to adjust the compression/rebound characteristics. The lower arms feature new shock mounting locations. Clamping spring perches and new shock boots are included to keep the shocks clean, smooth, and trouble free. Tekno RC also included the left and right handed shock mounting screws to ensure you never lose a shock during operation.

Includes: NB48.3 Buggy Kit, Shock and Diff Oil, Threadlock, Clear Body, 15T Clutch Bell, 46T Spur Gear, High-Downforce Wing, Decals and Instructions

Requires:

  • Radio: 2-3ch with High Torque/Speed steering & Throttle Servos
  • Engine: .21 cu in (3.4cc) glow engine with tuned pipe
  • Receiver Battery: Hump configuration
  • Tires an Wheels: 1/8 Scale Buggy
  • Starter Box & Glow Ignitor
  • Polycarbonate Safe Spray or Brush on Paint
  • Building & Track Equipment

features

  • Revised Chassis
  • Four Wheel Drive
  • Adjustable Clutch
  • Dual Position Motor Mount
  • Adjustable Caster and Camber

specs

Fuel Tank: 4.2oz (125cc)
Shock Towers: 0.197" (5mm)
Spur Gear: 46T
Vehicle Length: 17.1" (435mm) without wing
Vehicle Width: 12-12.2" (306-310mm)
Vehicle Wheelbase: 12.7-13.2 (323-335mm) adjustable
Vehicle Dry Weight: 7.17lb (3260g) varies depending on equipment
Battery Bod Dimensions: 2.3" x 1.4" x 1.3" (58 x 36 x 34.5mm)
Body Length: 13.4" (340mm)
Body Width: 7.2" (183mm)
Body Height: 4" (102mm)