All Categories

  • All Categories
  • Radio System
  • ESC - SPEED CONTROL - AIR
  • ESC - SPEED CONTROL - SURFACE
  • RADIO TRANSMITTERS - AIR
  • RADIO TRANSMITTERS - SURFACE
  • RECEIVERS - AIR
  • SERVOS - AIRPLANE & HELI
  • SERVOS - CAR & BOAT
  • RC Parts
  • AIRPLANE PARTS
  • BATTERIES
  • BOAT PARTS
  • CAR & TRUCK PARTS
  • CAR BODIES
  • CHARGERS
  • DRONE PARTS
  • HELICOPTER PARTS
  • TIRES & WHEELS
  • RC Vehicles
  • Car & Truck
  • RC Airplane
  • RC Boat
  • RC Drone&FPV
  • RC Helicopter
  • RC Tank

Tekno RC 1/8 ET48.3 Competition Electric Truggy Kit TKR5602

  • $305.49

This is the Electric Powered 1/8 Scale 4WD Competition ET48.3 Truggy Kit from Tekno RC.Includes: ET48.3 Truggy Kit with Body, Decals, Shocks, Shock Oil, Diff Oil, and Instructions Requires: Radio: 2-3 channel with high-torque stee..

  • Brand: Tekno RC
  • Product Code:STS0000068
  • Availability:In Stock

Tags: Tekno, 1/8, ET48.3, Competition, Electric, Truggy, Kit, TKR5602, Car, Truck

This is the Electric Powered 1/8 Scale 4WD Competition ET48.3 Truggy Kit from Tekno RC.

Includes: ET48.3 Truggy Kit with Body, Decals, Shocks, Shock Oil, Diff Oil, and Instructions

Requires:

  • Radio: 2-3 channel with high-torque steering servo, and optional brake servo
  • Motor: Brushless recommended
  • ESC: Compatible with selected motor
  • Battery: 4-6S LiPo
  • Battery Charger: For selected battery
  • MOD 1 Pinion or Traction Drive/Electric-Clutch system
  • Tires and Wheels: 1/8 scale Truggy type with inserts
  • Paint, building and track equipment

features

  • Trailing front spindles and spindle carriers
  • V2 hinge pin braces and inserts New clamping spring perches with captured shock boots
  • Rear hubs Low profile wing mount Revised bumper for increased ground clearance
  • Split center differential mount
  • Straight turnbuckle rod ends
  • Tapered aluminum front center driveshaft
  • Easily adjustable droop screws
  • Revised shock standoffs for easier droop measurement
  • Setup sheet for improved handling
  • Four wheel Drive CV driveshafts with captured pins
  • Fully adjustable suspension
  • Clear Truggy type body with high downforce wing, & low center of gravity lightweight wing mount
  • Adjustable Caster and Camber

specs

Vehicle
Length: 23.4" (595mm)
Wheelbase: 14.8-15.1"(375-385mm) adjustable
Weight: 9lbs (4000g) varies with equipment & battery used
Width: 16.4-16.5"* (416-420mm*) *optional hubs required
Dry Weight: 9.0lbs (4000g) may vary with equipment used
Diff Ratio: F/R 9/40t, center 44T
Battery Tray Dimensions: 1.9x5.8" (50x148mm) 2x2s or 1x4s config.

Body
Length: 17.5" (444mm)
Width: 4.8" (123mm)
Height: 5" (127mm)