All Categories

  • All Categories
  • Radio System
  • ESC - SPEED CONTROL - AIR
  • ESC - SPEED CONTROL - SURFACE
  • RADIO TRANSMITTERS - AIR
  • RADIO TRANSMITTERS - SURFACE
  • RECEIVERS - AIR
  • SERVOS - AIRPLANE & HELI
  • SERVOS - CAR & BOAT
  • RC Parts
  • AIRPLANE PARTS
  • BATTERIES
  • BOAT PARTS
  • CAR & TRUCK PARTS
  • CAR BODIES
  • CHARGERS
  • DRONE PARTS
  • HELICOPTER PARTS
  • TIRES & WHEELS
  • RC Vehicles
  • Car & Truck
  • RC Airplane
  • RC Boat
  • RC Drone&FPV
  • RC Helicopter
  • RC Tank

Tamiya RC Mazda 787B No.18 RM01 1/10 On-Road Car Kit TAM58555

  • $123.93

This is the Tamiya RC Mazda 787B No.18 RM01. The 1991 Mazda 787B Le Mans racer is the latest body to be offered in Tamiya's popular and successful RM-01 kit product line-up. Tamiya decided to create the RM-01 chassis in respo..

  • Brand: Tamiya
  • Product Code:IDSPT0759
  • Availability:In Stock

Tags: Tamiya, Mazda, 787B, No.18, RM01, 1/10, On-Road, Car, Kit, TAM58555, Truck

This is the Tamiya RC Mazda 787B No.18 RM01. The 1991 Mazda 787B Le Mans racer is the latest body to be offered in Tamiya's popular and successful RM-01 kit product line-up. 

Tamiya decided to create the RM-01 chassis in response to the 1/12 scale racing resurgence that's currently being seen around the world. The RM-01 chassis features a pivot-ball link rear (PBLR) suspension and a Direct Drive 2WD setup to provide you with linear throttle and steering response, as well as realistic racing action.

Includes: Mazda 787 No. 18 On-Road Race Car Kit, Tires, Wheels, Body, Decals, 14T Pinion Gear and Instruction Manual

Requires:

  • Radio: 2-channel with standard size steering servo
  • Battery: 2S 7.4V LiPo (#55105 6.6V LiFe battery recommended by Tamiya not available in USA)
  • ESC: Compatible with included motor
  • Battery Charger: LiPo compatible
  • Polycarbonate safe spray or brush on paint
  • Building and track equipment

FEATURES

  • Chassis: RM-01 0.098" (2.5mm) thick FRP lower deck
  • Drive: Rear wheel direct, steel rear axle
  • Motor: 380 size brushed (540 motor, not included, can be installed with the removal of motor plate adapter)
  • Front Suspension: Independent design with optimized kingpin trail for increased stability
  • Rear Suspension: Pivot-Ball Link Rear (PBLR) with center pivot ball pitch damper to control chassis pitch, roll damper and side links to control chassis roll
  • Differential: Ball type
  • Wheels: White plastic 1.4" (36.2mm) diameter, front 0.94" (24mm) wide rear, 1.4" (35.5mm) wide, hex hub type and 3-screw wheels can be used with this chassis
  • Tires: High grip sponge design 1.9 (47.5mm) outer diameter, front 0.98" (25mm) wide, rear 1.2" (32mm) wide
  • Body: Clear untrimmed polycarbonate plastic with white plastic helmeted driver head
  • Spur Gear: Plastic 63T 06 module

SPECS

Scale: 1/12 scale
Drive-train: 2WD RWD
Suspension: PBLR (Pivot Ball Link Rear Suspension)
Body material: Clear Polycarbonate
Motor type: 380-brushed type

Vehicle

Wheelbase: 7.9" (201mm)

Body

Length: 12.1" (308mm)
Width: 6.8" (174mm)
Height: 2.8" (71mm)