All Categories

  • All Categories
  • Radio System
  • ESC - SPEED CONTROL - AIR
  • ESC - SPEED CONTROL - SURFACE
  • RADIO TRANSMITTERS - AIR
  • RADIO TRANSMITTERS - SURFACE
  • RECEIVERS - AIR
  • SERVOS - AIRPLANE & HELI
  • SERVOS - CAR & BOAT
  • RC Parts
  • AIRPLANE PARTS
  • BATTERIES
  • BOAT PARTS
  • CAR & TRUCK PARTS
  • CAR BODIES
  • CHARGERS
  • DRONE PARTS
  • HELICOPTER PARTS
  • TIRES & WHEELS
  • RC Vehicles
  • Car & Truck
  • RC Airplane
  • RC Boat
  • RC Drone&FPV
  • RC Helicopter
  • RC Tank

Tamiya 1973 Ford Bronco CR01 Crawler TAM58436

  • $262.14

The Ford Bronco is a famous American 4X4 off-road vehicle. This 1970's model was among the first series called Early Bronco which were produced during 1965-1977. Three types of bodies were released; the fully-open Roadster, the si..

  • Brand: Tamiya
  • Product Code:IDSPT0703
  • Availability:In Stock

Tags: Tamiya, 1973, Ford, Bronco, CR01, Crawler, TAM58436, Car, Truck

The Ford Bronco is a famous American 4X4 off-road vehicle. This 1970's model was among the first series called Early Bronco which were produced during 1965-1977. Three types of bodies were released; the fully-open Roadster, the single cabin pick-up Utility, and the Wagon which had a resin roof. 

The body on the Ford Bronco featured triangular protrusions on both sides on the curved front hood which worked well as a guide for drivers to accurately measure the body size while driving. The front suspension features coil springs combined with the rigid axle, which was a first for mass-produced 4X4 vehicles and works well both on-road and off-road. The Bronco is still greatly popular around the world, particularly in America, where many are used as cross-country and rock crawling vehicles.

This is a 1/10 scale R/C assembly kit model of the Ford Bronco 1973 on the excellent CR-01 crawling chassis. The newly designed polycarbonate body captures the Bronco's classic form. Newly designed metal plated H parts (Grille, side mirrors, and light covers) are made of durable ABS resin. The Bronco comes equipped with CR-01 Cliff Crawler Tires (Item 54117). 

Type 540 motor included.-ESC, 2-channel R/C system, battery pack & charger are separately required. A wide range of Hop Up parts are available for you to further customize your machine. 

IncludesCR-01 chassis with 20 tooth pinion gear, oil-filled shocks, 540 motor, 3-piece beadlock wheels, crawler tires, clear body, decals, spur gear, and instructions

Requires:

  • Radio: 2-Channel with 1 Servo
  • Electronic Speed Control:
  • Radio Batteries: (8) AA size
  • Battery: 6-cell stick pack w/standard Tamiya connector
  • Charger: AC/DC timed or peak for 6-cell battery
  • Misc. Items: Paint, building and track equipment

FEATURES

  • Chassis: CR-01 dedicated crawler chassis with heavy duty ladder frame pressed aluminum channels and resin cross members
  • Drive: Four wheel shaft drive
  • Motor: 540 size
  • Ball Bearings: Full set included
  • Shocks: Oil-filled, compressed via pushrods and rocker arms
  • Gearbox: Planetary type with 20 tooth pinion gear for a 40.5:1 gear ratio, separately available 16 - 25 tooth pinion gears for gear ratios ranging from 50.6:1 - 32.4:1
  • Transmission: Single speed
  • Tires: Rock crawler type 4.9" (125mm) diameter, 2.2" (56mm) wide with foam inserts
  • Wheels: Plastic 3-piece beadlock 2.8" (71mm) diameter, 1.4" (35.8mm) wide, black in color
  • Body: Clear untrimmed polycarbonate
  • Bumper: High impact front plastic
  • Suspension: Four link long stroke coil spring front and rear
  • Differential: Planetary gear
  • Steering: Adjustable, direct link with servo saver

SPECS

Vehicle
Length: 17.1" (435mm)
Width: 10.3" (263mm)
Wheelbase: 11.3" (288mm)

Body
Length: 15"   (381mm)
Width: 6.8" (172mm)
Height: 5.2" (133mm)